Ignition Switch: Service and Repair

Removal
1. Disconnect negative cable at battery.
2. Disable air bag system. Refer to "Disabling Air Bag System: �.
3. Remove steering lock assembly (ignition switch) from steering column referring to "Steering Lock Assembly (Ignition Switch) Removal and Installation: ".

Installation
1. Install steering lock (ignition switch) to steering column referring to "Steering Lock Assembly (Ignition Switch) Removal and Installation: ".
2. Enable air bag system. Refer to "Enabling Air Bag System: ".

NOTE: When installing steering column, special care must be taken for tightening sequence and its torque.