LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2005 >> Reno LX, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Electrical Devices >> Repair Instructions >> Intake Air Temperature Sensor Removal and Installation >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Intake Air Temperature Sensor Removal and Installation: Removal

  1. Disconnect the negative battery cable.
  2. Disconnect the intake air temperature (IAT) sensor connector.
  3. Remove the IAT sensor by pulling it out of the air intake tube.
    Fig 1: Removing IAT Sensor From Air Intake Tube
    G04102614Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals