LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2005 >> Reno LX, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Electrical Devices >> Repair Instructions >> Knock Sensor Removal and Installation >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Knock Sensor Removal and Installation: Removal

  1. Disconnect the negative battery cable.
  2. Raise and suitably support the vehicle.
  3. Disconnect electrical connector at the knock sensor.
    Fig 1: Identifying Electrical Connector At Knock Sensor
    G04102620Courtesy of SUZUKI OF AMERICA CORP.
  4. Remove the bolt and the knock sensor.
    Fig 2: Removing Bolt And Knock Sensor
    G04102621Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals