LEMON Manuals
: Even more car manuals for everyone: 1960-2025
Home
>>
Suzuki
>>
2008
>>
Reno Automatic
>>
Repair and Diagnosis
>>
Transmission
>>
Automatic Trans
>>
Automatic Transmission
>>
Diagnostic Information and Procedures
>>
DTC P0606: Transaxle Control Module Processor Fault
>>
Conditions for Setting the DTC
July 1:
So it begins
. Don't worry, this is not in the correct legal jurisdiction!
Conditions for Setting the DTC
System voltage is too high or too low.
Transaxle input voltage is too high or too low.
Immediately after the above condition occurs.