LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1989 >> Tercel Base, 2D Hatchback, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests - 4-CYL CARBURETED >> Testing >> Fuel-Cut Solenoid Valve >> Tercel
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel-Cut Solenoid Valve: Tercel

  1. Remove solenoid valve from carburetor and connect positive battery lead to Black terminal. Connect negative battery lead to solenoid valve body. See Fig 1 & 53. Solenoid should click when battery is connected and disconnected.
  2. Move negative battery lead from solenoid valve body and connect to White/Black wire terminal. Solenoid should again click when battery is connected and reconnected. If solenoid valve does not function as described, replace valve. Check "O" ring for damage and replace if necessary. Reinstall valve if tested okay.
Fig 1: Testing Fuel-Cut Solenoid Valve (Tercel) (Test 1)
G119315Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: Testing Fuel-Cut Solenoid Valve (Tercel) (Test 2)
G119316Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals