Ignition Main Relay

WARNING: This page is about a different car, the 1993 Toyota MR2. However, it is still accessible from the selected car via links, so may be relevant.

Ensure ignition is off. Remove ignition main relay from relay box. Relay box is located on driver's side rear corner of engine compartment.
Using ohmmeter, check continuity between specified terminals. See Fig 1 and Fig 2. Check ignition main relay operation by applying battery voltage and ground and checking continuity between specified terminals. See Fig 1 and Fig 2. Replace ignition main relay if defective.

Fig 1: Checking Ignition Main Relay - Checking Continuity

Fig 2: Checking Ignition Main Relay - Checking Operation