Fuel Pump: Installation

1. Install NEW gasket on fuel tank. On non-turbo models, install fuel return hose on bottom of fuel pump mounting bracket. On all models, install fuel pump assembly in fuel tank so arrow on fuel pump mounting bracket aligns with arrow on fuel tank. See Figure.
   NOTE: Ensure arrow on fuel pump mounting bracket aligns with arrow on fuel tank when installing fuel pump assembly.
2. Install fuel pump retainer. Using fuel pump retainer remover/installer, tighten fuel pump retainer until arrow on fuel pump retainer is within the lines on the fuel tank. See Figure. Ensure arrow on fuel pump mounting bracket is still aligned with arrow on fuel tank.
3. Install retainer clamp on outside of fuel pump retainer. To install remaining components, reverse removal procedure using NEW gaskets on fuel outlet line union bolt. Tighten fuel outlet line union bolt to specification. See TORQUE SPECIFICATIONS  table.
4. Operate fuel pump and check for fuel leaks. See FUEL PUMP OPERATION in appropriate article listed below:

BASIC TESTING - NON-TURBO

BASIC TESTING - TURBO