LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2003 >> Matrix Base, FWD, Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal & Installation 4-Cylinder >> Torque Specifications >> Matrix
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Torque Specifications: Matrix

TORQUE SPECIFICATIONS (MATRIX)

Application Ft. Lbs. (N.m)
Control Lever Nut 10 (13)
ECT Sensor 15 (20)
Fuel Rail-To-Cylinder Head Bolt
1ZZ-FE 14 (19)
2ZZ-GE 21 (29)
Heated Oxygen Sensor 32 (43)
Intake Manifold Bolt/Nut 14 (19)
1ZZ-FE 22 (30)
2ZZ-GE (2)
Knock Sensor 15 (20)
Power Steering Pressure Switch 15 (20)
Throttle Body Bolt/Nut
 
1ZZ-FE 15 (20)
2ZZ-GE 16 (22)
INCH Lbs. (N.m) 
Camshaft Position Sensor Bolt 80 (9)
Crankshaft Position Sensor Bolt 80 (9)
Fuel Pipe Clamp-To-Cylinder Head Bolt 80 (9)
Fuel Pump Retaining Plate-To-Fuel Tank Bolt 53 (6)
Ignition Coil Bolt 80 (9)
PNP Switch Retaining Bolt
A/T (U240E) 44 (5)
A/T (A246E) 53 (6)
A/T (U341F) 44 (5)
PNP Switch Retaining Nut
A/T (U240E) 62 (7)
A/T (A246E) 44 (5)
A/T (U341F) 62 (7)
TP Sensor Retaining Bolt 18 (2)
Vehicle Speed Sensor Retaining Bolt
A/T (A246E) 97 (11)
A/T (U341F & U240E) (1)
M/T 97 (11)
VVL Oil Control Valve Retaining Bolt (2ZZ-GE) 80 (9)
VVT Camshaft Timing Oil Control Valve Retaining Bolt 80 (9)
(1) Information is not available from manufacturer.

(2) Tighten bolts/nuts "A" to 25 ft. lbs. (34 N.m) and bolt "B" to 34 ft. lbs. (46 N.m). See Figure.