Position Control Ecu Assembly: Removal
WARNING: This page is about a different car, the 2002 Lexus ES 300. However, it is still accessible from the selected car via links, so may be relevant.
- Remove power seat switch. See POWER SEAT SWITCH .
- Disconnect the connectors. Remove the left hand front seat inner belt assembly.
- Remove the 3 screws. See Fig 1. Disengage the claws. Remove the left hand inner front seat cushion shield.
- Remove the 2 screws. Remove the left hand inner No. 1 front seat cushion shield.
- Disconnect the clamps and connectors of each wiring harness. Remove the 4 bolts. Remove the front seat cushion assembly.
- Disconnect the connector. Remove the 2 bolts. Remove the position control ECU assembly.