Inspection Procedure
WARNING: This page is about a different car, the 2004 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
- Check brake fluid level warning switch (See
INSPECTION
).
- NG : Replace brake fluid level warning switch.
- OK : Go to next step.
- Check for harness and connector between brake fluid level warning switch and passenger side J/B ECU (See HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
).
- NG : Repair or replace harness and connector.
- OK : Proceed to next circuit inspection shown in problem symptoms table (See PROBLEM SYMPTOMS TABLE ).