How To Proceed With Troubleshooting

WARNING: This page is about a different car, the 2004 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Use these procedures to troubleshoot the power window control system (coupe).

VEHICLE BROUGHT TO WORKSHOP
1. Go To Next Step.
CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK (See CUSTOMER PROBLEM ANALYSIS CHECK )
1. Go To Next Step.
PROBLEM SYMPTOMS TABLE (See PROBLEM SYMPTOMS TABLE )
1. If the fault is not listed on the problem symptoms table, proceed to A.
2. If the fault is listed on the problem symptoms table, proceed to B.
1. B: Go to step 5
2. A: Go to Next Step.
OVERALL ANALYSIS AND TROUBLESHOOTING
1. Terminals of ECU (see TERMINALS OF ECU )
2. On-vehicle Inspection (see ON-VEHICLE INSPECTION )
3. Inspection (see INSPECTION )
1. Go To Next Step.
ADJUST, REPAIR OR REPLACE
1. Go To Next Step.
RESET POWER WINDOW REGULATOR MOTOR
1. If the AUTO switch (driver side switch) lamp of the power window regulator master switch is blinking after the repair, reset the power window motor (see INITIALIZATION ).
1. Go To Next Step.
CONFIRMATION TEST
1. END