How To Proceed With Troubleshooting
The hand-held tester can be used at step 3, 6, 9, 12.
- Vehicle Brought to Workshop
Go To Next step.
- Customer Problem Analysis (SEE CUSTOMER PROBLEM ANALYSIS CHECK
)
Go To Next step.
- Check and Clear DTCs and Freeze Frame Data (SEE DTC CHECK CLEAR
)
Go To Next step.
- Problem Symptom Confirmation
Symptom does not occur: Go to step 5
Symptom occur: Go to step 6
- Symptom Simulation (SEE ELECTRONIC CIRCUIT INSPECTION PROCEDURE
)
Go To Next step.
- DTC Check (SEE DTC CHECK CLEAR
)
There is no output: Go to step 7
There is output: Go to step 8
- Problem Symptoms Table (SEE PROBLEM SYMPTOMS TABLE
)
Check for fluid leakage and Go to step 10
- DTC Chart (SEE DIAGNOSTIC TROUBLE CODE CHART
)
Go To Next step.
- Circuit Inspection (SEE DTC C0200/31 RIGHT FRONT SPEED SENSOR CIRCUIT DTC C0205/32 LEFT FRONT SPEED SENSOR CIRCUIT
to SEE TS AND CG TERMINAL CIRCUIT
)
Go To Next step.
- Identification of Problem
- Repair
Go To Next step.
- Confirmation Test
End