CD Sound Skips

WARNING: This page is about a different car, the 2006 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.

CHECK CD
1. Check for dirt on the CD surface.
  OK: The CD is clean.
  
  HINT:
  
  If dirt is on the CD surface, wipe it with a soft cloth from inside to outside in a radial direction.
  
  NOTE: Do not use a conventional record cleaner or anti-static preservative.
  
  Fig 1: Checking For Dirt On CD Surface
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
NG: CLEAN CD

OK: GO TO NEXT STEP
CHECK CD
1. Check that the CD is not deformed or cracked.
  OK: No deformations or cracks appear on the CD.
  
  Fig 2: Checking CD For Deformed Or Cracked
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
NG: REPLACE CD

OK: GO TO NEXT STEP
CHECK USING ANOTHER CD
1. Check using another CD.
  1. Check if the problem recurs using another CD.
    OK: The problem does not recur.
OK: REPLACE CD

NG: GO TO NEXT STEP
CHECK RADIO AND NAVIGATION ASSEMBLY
1. Check the radio and navigation assembly installation condition.
  1. Check that the radio and navigation assembly is properly installed (See POWER SOURCE CIRCUIT (RADIO AND NAVIGATION ASSEMBLY) ).
    OK: Radio and navigation assembly is properly installed.
NG: REINSTALL RADIO AND NAVIGATION ASSEMBLY PROPERLY

OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE