How To Proceed With Troubleshooting

HINT:

Troubleshoot in accordance with the procedures on the following articles.

1. VEHICLE BROUGHT TO WORKSHOP 
2. CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK 
3. PROBLEM SYMPTOMS TABLE 
   1. When problem is not listed on problem symptoms table, proceed to A.
   2. When problem is listed on problem symptoms table, proceed to B.

   B:  Go to STEP  5

   A: Go to next step. 

4. PERFORM TROUBLESHOOTING ACCORDING TO MALFUNCTION SYMPTOM 
   1. Data list / Active test.

      HINT:

      See DATA LIST / ACTIVE TEST 

   2. Circuit inspection.
5. ADJUST, REPAIR OR REPLACE 
6. RESET POWER WINDOW REGULATOR MOTOR 
   1. If the AUTO switch (driver side switch) light of the power window master switch is blinking after the repair, reset the power window motor (See CUSTOMIZE PARAMETERS  ).

   NEXT: END