Steering Wheel: Installation: Installation

WARNING: This page is about a different car, the 2011 Toyota Matrix. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL LOWER STEERING WHEEL BOSS COVER
1. Engage the 2 claws to install the lower steering wheel boss cover to the steering wheel sub-assembly.
  
  Fig 1: View Of Lower Steering Wheel Boss Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Engage the 2 pins.
INSTALL CRUISE CONTROL SWITCH WIRE (w/ Cruise Control System)
INSTALL CRUISE CONTROL MAIN SWITCH (w/ Cruise Control System) . Refer to INSTALLATION - Step 1
INSTALL NO. 1 STEERING WHEEL ORNAMENT (w/o Steering Pad Switch RH)
1. Engage the 2 pins and claw to install the No. 1 steering wheel ornament to the steering wheel sub-assembly.
  
  Fig 2: View Of No. 1 Steering Wheel Ornament (w/o Steering Pad Switch RH)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the screw.
  Torque: 2.4 N*m (24 kgf*cm, 21 in.*lbf)
INSTALL STEERING PAD SWITCH LH (w/o Steering Pad Switch RH) . Refer to INSTALLATION - Step 1
INSTALL STEERING PAD SWITCH ASSEMBLY (w/ Steering Pad Switch RH) . Refer to INSTALLATION - Step 2
ALIGN FRONT WHEELS FACING STRAIGHT AHEAD
ADJUST SPIRAL CABLE . Refer to INSTALLATION - Step 23
INSTALL STEERING WHEEL ASSEMBLY
1. Align the matchmarks on the steering wheel assembly and steering main shaft.
  
  Fig 3: Remove/Install Steering Wheel Assembly Set Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the steering wheel assembly set nut.
  Torque: 50 N*m (510 kgf*cm, 37 ft.*lbf)
3. Connect the connectors to the spiral cable sub-assembly.
INSPECT STEERING WHEEL CENTER POINT
INSTALL STEERING PAD
Refer to INSTALLATION