LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2013 >> Prius Five >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 101 (Cellular Communication System (Service Information) (Plug-In)) >> Back-Up Battery >> Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Back-Up Battery: Installation: Installation

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL MAYDAY BRACKET 
  2. INSTALL BACK-UP BATTERY 
    1. Install the back-up battery to the mayday bracket as shown in the illustration.
      Fig 1: Installing Back-Up Battery To No. 1 Telephone Bracket
      GTY216376Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL BACK-UP BATTERY WITH BRACKET 
    1. Engage the 2 guides.
      Fig 2: Locating Back-Up Battery With Bracket, Connector, Bolt & Guides
      GTY225789Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the back-up battery with bracket with the bolt.
    3. Connect the connector.
  4. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (w/o Navigation System)  . Refer to INSTALLATION - Step 5
  5. INSTALL NAVIGATION RECEIVER WITH BRACKET (w/ Navigation System)  . Refer to INSTALLATION - Step 6
  6. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY  . Refer to INSTALLATION - Step 27
  7. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH  . Refer to INSTALLATION - Step 28
  8. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY  . Refer to INSTALLATION - Step 30
  9. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY  . Refer to INSTALLATION - Step 31
scientia non olet · About LEMON Manuals