LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2004 >> GTI Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> 2.8L - Fuel Injection Ignition [BDF] - [01-On Board Diagnostic] >> 01 On Board Diagnostic (OBD) >> Measured value (data) blocks >> Measured value blocks, display groups 0...9 - Basic functions, evaluating >> Evaluating display group 1, display zone 1 - Engine speed (idle speed)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Evaluating display group 1, display zone 1 - Engine speed (idle speed)

VAG1551 display Possible cause Corrective action
Less than specified
  • Throttle Valve Control Module J338 sticking/faulty
 
  • Large amount of unmetered air (cannot be compensated for by the idling stabilization)
   
Greater than specified
  • Idle speed not detected
 
  • Large amount of unmetered air (cannot be compensated for by the idling stabilization)
 
  • Throttle Valve Control Module J338 sticking/faulty
   
 
  • Supply voltage too low, engine tries to reduce charge difference through increased idle speed