LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2004 >> GTI Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> 2.8L - Fuel Injection Ignition [BDF] - [01-On Board Diagnostic] >> 01 On Board Diagnostic (OBD) >> Measured value (data) blocks >> Measured value blocks, display groups 50...69 - Speed control, Evaluating >> Display group 54 - Speed control
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Display group 54 - Speed control

Display group 54 - Speed control
  • While driving
Read measured value block 54 Indicated on display    
xxxx rpm Text xxx.x % xxx.x %      
1 2 3 4 Display zones Specification Evaluation
        Throttle valve angle Angle sensor -1- for throttle drive G187 0.0...100.0 % ---
      Throttle valve angle Throttle Position (TP) Sensor 1 G79 0.0...100.0 % ---
    Operating condition (idling, part throttle, enrichment, overrun, wide open throttle) --- ---
  Engine speed 640...2520 rpm ---
NOTE:
  • Note on display zone 1:
  • Above an engine speed of approx. 2520 rpm no indication will appear on display.
NOTE:
  • Note on display zone 2:
  • The operating condition is displayed according to engine speed or load. At a higher engine speed, "overrun" is displayed when throttle valve is closed up to 1450 rpm only, and then idle appears thereafter.
NOTE:
  • Note on display zone 3 and 4:
  • The specifications do not fully reach the max. min. figures.