Coding Control Module

With Scan Tool (VAG 1551) connected, turn ignition ON. Press buttons "1" and "5" to select air bag code "15". Confirm input with "Q" button. Control module version information will appear in scan tool display. Use right arrow to scroll forward through program until RAPID DATA TRANSFER and SELECT FUNCTION is displayed. Press buttons "0" and "7" to select "Code Control Module" function "07". Confirm input with "Q" button. Enter correct air bag control module input code for vehicle configuration. See IDENTIFYING CONTROL MODULE INPUT CODES  table. Confirm input with "Q" button. If incorrect input code is entered, FAULT and incorrect code will be displayed. If code continues to rejected by control module, inspect to confirm proper control module is installed in vehicle or if improper code is being input. See IDENTIFYING CONTROL MODULE INPUT CODES  table. If code is accepted, press right arrow. Enter 0 and 6 and then press "Q" button to end procedure. Check system for proper operation. Go to SYSTEM OPERATION CHECK  .