LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volvo >> 1990 >> 240 Base, 4D Sedan, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> Testing & Diagnosis >> Engine Controls - System/Component Tests >> Fuel Control >> Cold Start Valve
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Cold Start Valve

  1. Disconnect cold start valve harness connector. Connect ohmmeter leads across cold start valve terminals.
  2. Ohmmeter should read 10 ohms. If 10 ohms are not read, replace cold start valve.
scientia non olet · About LEMON Manuals