Bleeding Brake System
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1998 Volvo V90, 1998 Volvo V70, 1998 Volvo S90, 1998 Volvo S70, and 1997 Volvo V90. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Use only DOT 4 grade brake fluid.
- Raise and support vehicle. Fill master cylinder reservoir to maximum mark. Bleed brakes in sequence. See BRAKELINE BLEEDING SEQUENCE table. After bleeding brakes, depress brake pedal with a force equal to an abrupt stop.
- On 850, C70, S70 and V70 models, pedal travel should not exceed 1.57" (40 mm). On 960, S90 and V90 models, pedal travel should not exceed 2.17" (55 mm). On all models, brake warning light should not illuminate. If air is still present in system, repeat procedure.
BRAKELINE BLEEDING SEQUENCE
| Application | Sequence |
|---|---|
| 850, C70, S70 & V70 | LR Or RR, RF, LF |
| 960, S90 & V90 | LR, RR, LF, RF |