Automatic And Manual Transmission - Design And Function (Convertible)
- Gearshift Forks And Synchromesh Units (M56; 1998-1999)
- Gearshift Mechanism (M56; 1998-1999)
- On Board Diagnostics II (OBD II) (B5234T3, Aw50-42; 1999-2000)
- On Board Diagnostics II (OBD II) (B5244T, Aw50-42; 2000)
- On Board Diagnostics II (OBD II) (B5254T, Aw50-42; 1999)
- Power Train (M56; 1998-1999)
- Transmission, Internal Components (M56; 1998-1999)
- Diagnostic Functions (Aw55-50/51SN; 2001-2004)
- Transmission control module (TCM) diagnostic functions
- General
- Diagnostic trouble codes (DTCs)
- Reading and erasing diagnostic trouble codes (DTCs)
- Reading off input and output signals
- Activating components
- Reading off the control module identification
- Description of activations
- Description of parameters
- Parameters, status
- General
- Shifting program according to gear-shift position sensor
- Gear-shift position sensor position
- Gear-shift position sensor signal A
- Gear-shift position sensor signal B
- Gear-shift position sensor signal C
- Gear-shift position sensor signal PA
- Winter mode status
- Current gear (according to gear ratio)
- New gear (according to solenoids)
- Status, shift solenoid S1, S2, S3, S4, S5
- Stop (brake) lamp switch
- Kickdown
- TCM diagnostic trouble codes (DTCs) status
- TCM diagnostic check status
- Parameters, value
- Engine speed (RPM)
- Transmission speed sensor, input speed
- TCM speed sensor, calculated speed
- Vehicle speed ABS
- Throttle, position
- Battery voltage
- Oil temperature sensor signal
- Oil temperature
- Lock-up solenoid SLU, amperage
- Line pressure solenoid SLS, amperage
- Line pressure solenoid SLTH, amperage
- Engine torque
- Torque check
- Torque reduction when shifting
- Torque limiting requested
- Engine control module (ECM) engine coolant temperature (ECT)
- Text transmitted to the driver information module
- Parameters, status
- Transmission control module (TCM) diagnostic functions
- Emergency Programs In The Event Of A Fault (Aw50-42; 1999-2000)