Tire Monitor System

When low inflation pressure is detected or if the system is not functioning properly, Tire Monitor will light up the tire pressure warning light (also referred to as a telltale) in the instrument panel and will display one of the following messages in the text window, for example: "Tire pressure low Check rear right tire" or "Tire press. syst Service required". If two or more tires have low pressure or if the system cannot determine which tire has low pressure, a general text (Tire pressure low Check tires) will be displayed.

Calibrating Tire Monitor: 

In order for Tire Monitor to work correctly, tire pressure reference values must be set. This must be done each time wheels are changed or tire pressures are adjusted to be different from the already established pressure.

1. Switch off the engine.
2. Inflate the tires to the desired pressure and put the ignition in mode II.
3. Press the MY CAR button on the center console control panel and select Settings > Car Settings > Tire Monitoring.
4. Press OK/MENU, select "Calibrate Tire Pressure" and press OK/MENU again.
5. Drive away. The calibration process will be completed while driving and will be interrupted if the vehicle is parked and the engine is switched off. Calibration continues automatically when driving resumes. The system will not give any confirmation when calibration is finished although it will state if calibration fails.