Section 53 (Body Control System)
WARNING: This page is about a different car, the 2002 Pontiac Bonneville. However, it is still accessible from the selected car via links, so may be relevant.
- Schematic And Routing Diagrams
- Component Locator
- Diagnostic Information And Procedures
- Diagnostic Starting Point - Body Control System
- Scan Tool Output Controls
- Scan Tool Data List
- Scan Tool Data Definitions
- Diagnostic Trouble Code (DTC) List
- DTC B1000: Internal Fault Detection
- DTC B1001: IPM Is Not Calibrated To The Vehicle
- DTC B1004: Keep Alive, Or Long Term, Memory In The Module Has Been Reset
- DTC B1007: EEPROM Error
- DTC B1009: EEPROM Check Sum Error
- DTC B1010: Calibration ROM Check Sum Error
- DTC B1390: 2 Battery Positive Voltages Differ
- DTC B1422: One Of The 4 Monitored Ignition Switch Circuits Has Malfunctioned
- Symptoms - Body Control System
- Power Mode Mismatch
- Control Module References
- Repair Instructions
- Dash Integration Module Replacement
- Instrument Panel Cluster (IPC) Replacement
- Instrument Panel Module Replacement
- Rear Integration Module Replacement
- Body Control Module (BCM) Programming/RPO Configuration (Dim)
- Body Control Module (BCM) Programming/RPO Configuration (IPM)
- Body Control Module (BCM) Programming/RPO Configuration (Rim)
- Description And Operation