LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 1999 >> Durango 5.9 Z, 4WD, Part Time >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Component Remove/Install/Overhaul - RWD - Gasoline >> Computerized Engine Controls >> Powertrain Control Module (Pcm) >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

  1. PCM is located in the engine compartment. See Fig 1-Fig 3 . Disconnect negative battery cable. Remove cover for access to electrical connectors at PCM. Disconnect electrical connectors from PCM. Remove PCM retaining bolts and PCM.
  2. To install, reverse removal procedure. Tighten PCM retaining bolts to specification. See TORQUE SPECIFICATIONS .
Fig 1: Locating PCM (Dakota & Durango)
G98I00080Courtesy of CHRYSLER LLC
Fig 2: Locating PCM (Ram Pickup)
G98A01071Courtesy of CHRYSLER LLC
Fig 3: Locating PCM (Ram Van & Ram Wagon)
G98C01072Courtesy of CHRYSLER LLC
scientia non olet · About LEMON Manuals