Installation (Durango)
- Ensure sealing area on fuel tank is clean. Using NEW rubber gasket, install fuel pump module on fuel tank. DO NOT reuse rubber gasket. Ensure rubber gasket remains in place.NOTE: Fuel pump module must be properly positioned in fuel tank to prevent float from contacting fuel tank.
- Rotate fuel pump module so fuel pump is properly positioned in fuel tank. See Fig 1. Apply a small amount of engine oil on each locking finger at fuel pump module lock ring area. Install fuel pump lock ring on fuel pump module.
- Using a hammer and brass drift, tap fuel pump module lock ring clockwise until 6 locking fingers engage in fuel pump module lock ring and lock tab engages notch on fuel pump module lock ring. Ensure lock tab fully engages with notch on fuel pump module lock ring. Reinstall fuel tank using proper procedure.