LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Engine Controls - System & Component Testing) >> Fuel Systems >> Fuel Control >> Fuel Injectors
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Injectors

WARNING: This page is about a different car, the 2002 Dodge Durango and 2002 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect Fuel Injector harness connector. Connect an ohmmeter between Fuel Injector terminals. Resistance should be about 10.8-13.2 ohms at 68°F (20°C). If resistance is not as specified, replace Fuel Injector. Perform POWERTRAIN VERIFICATION TEST VER-1 (JTEC)  or POWERTRAIN VERIFICATION TEST VER-1 (NGC)  under VERIFICATION TESTS. If resistance is as specified, perform appropriate Fuel Injector circuit test. See SELF-DIAGNOSTIC SYSTEM in SELF-DIAGNOSTICS - DAKOTA, SELF-DIAGNOSTIC SYSTEM in SELF-DIAGNOSTICS - DURANGO - JTEC or SELF-DIAGNOSTIC SYSTEM in SELF-DIAGNOSTICS - DURANGO - NGC article.

scientia non olet · About LEMON Manuals