DTC Chart
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods
| Module | DTC | Description | Action |
|---|---|---|---|
| BCMC | U0100:87 | Lost Communication With ECM/PCM "A": Missing Message | GO to Pinpoint Test A |
| BCMC | U0121:87 | Lost Communication With Anti-Lock Brake System (ABS) Control Module: Missing Message | GO to Pinpoint Test B |
| BCMC | U0140:87 | Lost Communication With Body Control Module: Missing Message | GO to Pinpoint Test C |
| BCMC | U0146:87 | Lost Communication With Serial Data Gateway "A": Missing Message | GO to Pinpoint Test D |
| BCMC | U0164:87 | Lost Communication With HVAC Control Module: Missing Message | GO to Pinpoint Test E |
| BCMC | U023A:87 | Lost Communication With Image Processing Module A: Missing Message | GO to Pinpoint Test F |
| BCMC | U0415:81 | Invalid Data Received from Anti-Lock Brake System (ABS) Control Module "A": Invalid Serial Data Received | GO to Pinpoint Test B |
| BCMC | U1000:00 | Solid State Driver Protection Active: Driver Disabled: No Sub Type Information | GO to Pinpoint Test G |
| BCMC | U2100:00 | Initial Configuration Not Complete: No Sub Type Information | GO to Pinpoint Test H |
| BCMC | U2200:00 | Control Module Configuration Memory Corrupt: No Sub Type Information | GO to Pinpoint Test H |
| BCMC | U3000:49 | Control Module: Internal Electronic Failure | GO to Pinpoint Test I |
| BCMC | U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | GO to Pinpoint Test J |
| BCMC | U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | GO to Pinpoint Test K |