DTC Chart
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods
| Module | DTC | Description | Action |
|---|---|---|---|
| SIMA | U011D:00 | Lost Communication With All Wheel Drive Control Module: No Sub Type Information | GO to Pinpoint Test A |
| SIMA | U0121:00 | Lost Communication With Anti-Lock Brake System (ABS) Control Module: No Sub Type Information | GO to Pinpoint Test B |
| SIMA | U012A:00 | Lost Communication With Chassis Control Module "A": No Sub Type Information | GO to Pinpoint Test C |
| SIMA | U0146:00 | Lost Communication With Serial Data Gateway "A": No Sub Type Information | GO to Pinpoint Test D |
| SIMA | U2002:12 | Switch: Circuit Short to Battery | GO to Pinpoint Test E |
| SIMA | U2002:14 | Switch: Circuit Short To Ground or Open | GO to Pinpoint Test E |
| SIMA | U2002:9E | Switch: Stuck On | GO to Pinpoint Test E |
| SIMA | U202B:62 | In-Use Application Signing Key: Signal Compare Failure | GO to Pinpoint Test F |
| SIMA | U3000:04 | Control Module: System Internal Failure | GO to Pinpoint Test G |
| SIMA | U3000:44 | Control Module: Data Memory Failure | GO to Pinpoint Test G |
| SIMA | U3000:45 | Control Module: Program Memory Failure | GO to Pinpoint Test G |
| SIMA | U3000:49 | Control Module: Internal Electronic Failure | GO to Pinpoint Test G |
| SIMA | U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | GO to Pinpoint Test H |
| SIMA | U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | GO to Pinpoint Test I |