LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2007 >> Element SC, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Audio System (V6)) >> Error Codes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Error Codes

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Honda Crosstour, 2014 Honda Crosstour, 2013 Honda Crosstour, 2012 Honda Crosstour, and 2011 Honda Accord Crosstour. However, it is still accessible from the selected car via links, so may be relevant.

The audio system can display a few error codes when some problems are detected with the audio disc player, the audio disc, the USB audio, the anti-theft code, or the XM radio. This is not a complete list of audio error codes. Refer to SYMPTOM TROUBLESHOOTING , or go to any official Honda service website for more service information.

CD Error Codes 

POSSIBLE CAUSE CHART

Error Code Displayed Possible Cause Solution
HEAT ERROR Disc player is hot. This can happen if the vehicle is parked out in the hot sun all day. Park the vehicle in a cooler place for a while and try the disc player again. If the error code is still present, try another disc. If the error code is still present, replace the audio unit; with navigation (see WITH NAVIGATION SYSTEM  ), without navigation (see WITHOUT NAVIGATION SYSTEM  ).
UNSUPPORTED Track/File format not supported.
  • Current track is skipped. The next supported track of file plays automatically.
  • Verify that CD, CD-R, or CD-RW file names end in CD-DA or WAV.
  • Verify that CD, CD-R, or CD-RW with compressed music formats end in MP3 or WMA.
  • Other file formats like iTunes or Ogg are not recognized.
  • WMA files may have (DRM) copy protection and cannot be read.
MECH ERROR
  • CD label jammed in the mechanism.
  • CD eject mechanism or motor is inoperative.
  • CD spindle motor won't spin up the CD.
Press the EJECT button and hold it for 5 seconds. If the CD does not eject, try again. If the CD still won't eject, replace the unit.

XM Error Codes 

POSSIBLE CAUSE CHART

Error Code Displayed Possible Cause Solution
LOADING XM radio is acquiring audio or program information. Wait until the radio receives the information.
OFF AIR XM channel not in service. Try another XM channel.
NO SIGNAL Loss of signal. Both terrestrial and satellite antennas have lost signal. Park the vehicle outside with a clear view of the southern horizon.
UPDATING XM radio is receiving information update from the network. This message disappears once the update finishes.
CHECK ANTENNA XM antenna error. Repair an open or a short in the satellite antenna. Substitute a known-good AM/FM/XM antenna (see AM/FM/XM ANTENNA REPLACEMENT  ), and recheck. If the error is gone, replace the original XM antenna. If the error is still present, replace the antenna lead.
ANTENNA ERROR
NO INFO No signal from XM. Check a known-good vehicle with XM radio. If the known-good vehicle has the same symptoms, contact XM Radio at 800-852-9696.
NOTE: Do these checks with the vehicle parked outside with a clear view of the southern horizon.

Audio Unit Error Codes 

POSSIBLE CAUSE CHART

Error Code Displayed Possible Cause Solution
CODE ERROR 1 Anti-theft code mismatch (1st try). Enter the correct anti-theft code.
CODE ERROR E Anti-theft code mismatch (10th try). Remove the No. A15 (10 A) fuse in the under-hood fuse/relay box, then reinsert it. You will have 10 more tries to enter the correct anti-theft code.

USB Error Codes 

POSSIBLE CAUSE CHART

Error Code Displayed Possible Cause Solution
UNPLAYABLE FILE The audio unit cannot read the file(s). Check the files in the USB device. There is a possibility that the files have been damaged or are not supported.
UNSUPPORTED Unsupported USB device is connected. Connect the applicable USB device, (see Owner's Manual)
USB LOAD Data is being loaded from the USB device. Check the files in the USB device. There is a possibility that the files have been damaged, or are not supported.
USB NO SONG There are no files or files that are not supported on the USB device. Check the files in the USB device. There is a possibility that the files have been damaged, or are not supported.
USB NO DATA USB device is not connected. If the code appears when the USB devices is connected, go to USB DEVICE DOES NOT FUNCTION  .