Section 35 (Audio System & Visual System)
WARNING: This page is about a different car, the 2007 Toyota Tacoma. However, it is still accessible from the selected car via links, so may be relevant.
- Audio And Visual System
- Parts Location
- System Diagram
- System Description
- How To Proceed With Troubleshooting
- Identification Of Noise Source
- Problem Symptoms Table
- Terminals Of Ecu
- DTC Check/Clear
- Noise Occurs
- Sound Quality is Bad in All Modes
- Sound Quality Is Bad Only When CD Is Played (Volume Is Too Low)
- CD Cannot Be Ejected
- CD Cannot Be Inserted Or Is Ejected Right After Insertion
- CD Sound Skips
- Radio Broadcast Cannot Be Received (Bad Reception)
- Steering Pad Switch Circuit
- Illumination Circuit
- Speaker Circuit
- AMP Mute Signal Circuit (from Radio Receiver Assembly)
- AMP Sound Signal Circuit
- Sound Signal Circuit Between Radio Receiver And Stereo Component Amplifier
- AVC-LAN Circuit
- Radio Receiver Power Source Circuit
- Stereo Component Amplifier Power Source Circuit
- Radio Receiver
- RADIO SETTING CONDENSER (for 1GR-FE)
- RADIO SETTING CONDENSER (for 2TR-FE)
- FRONT NO. 1 SPEAKER (for Regular Cab)
- FRONT NO. 1 SPEAKER (Except Regular Cab)
- Front No. 2 Speaker
- REAR SPEAKER (for Double Cab)
- REAR SPEAKER (for Access Cab)
- No. 1 Speaker With Box
- Radio Antenna Cord
- Radio Antenna Holder
- Radio Antenna Pole
- Voltage Inverter
- Steering Pad Switch