CMP Sensor Replacement

WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.

Remove the cowl cover (see COWL COVER REPLACEMENT ) and the under-cowl panel (see UNDER-COWL PANEL REPLACEMENT ).
Remove the air cleaner (see AIR CLEANER REMOVAL/INSTALLATION ).
Disconnect the CMP sensor connector (A).

Fig 1: CMP Sensor Connector, CMP Sensor & O-Ring With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the CMP sensor (B).
Install the parts in the reverse order of removal with a new O-ring (C).