MAF Sensor/IAT Sensor Replacement

WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the MAF sensor/IAT sensor connector (A).

Fig 1: MAF Sensor/IAT Sensor Connector, Screws & MAF Sensor/IAT Sensor With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the screws (B).
Remove the MAF sensor/IAT sensor (C).
Install the parts in the reverse order of removal with a new gasket (D).