LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2014 >> Pilot EX-L, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Active Control Engine Mount (ACM) System) >> Engine Mount Control Unit Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Mount Control Unit Replacement

WARNING: This page is about a different car, the 2011 Honda Pilot, 2010 Honda Pilot, and 2009 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
  1. Do the battery terminal disconnection procedure (see BATTERY TERMINAL DISCONNECTION AND RECONNECTION .
  2. Remove the passenger's dashboard undercover (see PASSENGER'S DASHBOARD TRIM REMOVAL/INSTALLATION ), and the right kick panel (see TRIM REMOVAL/INSTALLATION - DOOR AREAS ).
  3. Disconnect the engine mount control unit 16P connector (A).
    Fig 1: Engine Mount Control Unit 16P Connector & Engine Mount Control Unit With Torque Specifications
    G05960815Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the engine mount control unit (B).
  5. Install the parts in the reverse order of removal.
  6. Do the battery terminal reconnection procedure (see BATTERY TERMINAL DISCONNECTION AND RECONNECTION
scientia non olet · About LEMON Manuals