LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2009 >> M45 Base >> Repair and Diagnosis >> Transmission >> Transfer Case >> Service Information >> Transfer Assembly >> Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation: Removal

  1. Remove exhaust front tube with power tool. Refer to "COMPONENT "(VQ35HR models), "COMPONENT "(VK45DE models).
  2. Remove front and rear propeller shaft. Refer to "COMPONENT "and "COMPONENT ".
  3. Disconnect transfer assembly harness connector and separate harness from transfer assembly.
  4. Remove air breather hose. Refer to "REMOVAL AND INSTALLATION ".
  5. Remove control rod. Refer to "CONTROL ROD REMOVAL AND INSTALLATION ".
  6. Support transfer assembly and transmission assembly with a jack.
  7. Remove rear engine mounting member and engine mounting insulator with power tool. Refer to "AWD : COMPONENT "(VQ35HR models), "AWD : COMPONENT "(VK45DE models).
  8. Lower jack to the position where the top transfer mounting bolts can be removed.
  9. Remove transfer mounting bolts with power tool and separate transfer from transmission.
    CAUTION: Secure transfer assembly and transmission assembly to a jack.
    Fig 1: Supporting Transfer Assembly And Transmission Assembly On Jack
    G05219011Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals