Data Monitor Mode
Display Item List
ITEM REFERENCE
| Item [Display or Unit] | Remarks |
|---|---|
| VHCL SPEED SE [km/h] or [mph] | Vehicle speed received via CAN communication is displayed. |
| STEERING ANG [°] | Steering angle received via CAN communication is displayed. |
| ENGINE SPEED [rpm] | Engine speed received via CAN communication is displayed. |
| POWER STR SOL [A] | Power steering solenoid controlling current that RAS control unit outputs is displayed. |
| RR ST ANG-MAI [V] | Rear wheel steering angle main sensor output voltage is displayed. |
| RR ST ANG-SUB [V] | Rear wheel steering angle sub sensor output voltage is displayed. |
| RR ST ANG VOL [V] | Voltage supplied from RAS control unit to rear wheel steering angle sensor is displayed. |
| C/U VOLTAGE [V] | Voltage supplied to RAS control unit is displayed. |
| MOTOR VOLTAGE [V] | Voltage supplied from RAS control unit to RAS motor is displayed. |
| MOTOR CURRENT [A] | RAS motor relay controlling current that RAS control unit outputs is displayed. |
| MOTOR CRNT OPE [A] | Current commanded value to RAS motor is displayed. |
| RR ANG OPE [°] | Angle commanded value to rear wheel steering angle sensor is displayed. |
| STOP LAMP SW [On/Off] | Condition of stop lamp switch ON/OFF is displayed. |
| HICAS RELAY [On/Off] | RAS motor relay ON/OFF condition is displayed. |
| FAILSAFE [On/Off] | Fail-safe ON/OFF condition is displayed. |
| WARNING LAMP [On/Off] | RAS warning lamp operating condition is displayed. |