DTC Confirmation Procedure
WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
- Press push-button ignition switch for 1 second under the following condition.
CVT models
- Selector lever: In the P position
- Brake pedal: Not depressed
M/T models
- Shift lever: In the Neutral position
- Clutch pedal: Not depressed
- Release push-button ignition switch and wait 1 second.
- Check DTC in "Self diagnostic result" mode of "BCM" using CONSULT-III.
Is DTC detected?
YES: Go to , "DIAGNOSIS PROCEDURE "
NO: INSPECTION END
- Press push-button ignition switch for 1 second under the following condition.