Detailed Flow

WARNING: This page is about a different car, the 2008 Infiniti M45 and 2008 Infiniti M35. However, it is still accessible from the selected car via links, so may be relevant.

INTERVIEW AND SYMPTOM CONFIRMATION
Check the malfunction symptoms by performing the following items.
- Interview the customer to obtain the malfunction information (conditions and environment when the malfunction occurred).
- Check the symptom.
Is the occurred symptom malfunction?

Yes: GO TO 2.

No: INSPECTION END
DIAGNOSIS WITH CONSULT-III
1. Connect CONSULT-III and perform a self-diagnosis for "MULTI AV".
  Refer to CONSULT-III FUNCTION (MULTI AV) . (without navigation)
  
  Refer to CONSULT-III FUNCTION (MULTI AV) . (with navigation)
  
  NOTE: Skip to step 4 of the diagnosis procedure if "MULTI AV" is not displayed.
2. Check if any DTC is displayed in the self-diagnosis results.
Is DTC displayed?

Yes: GO TO 3.

No: GO TO 4.
TROUBLE DIAGNOSIS FOR DTC
1. Check the DTC indicated in the self-diagnosis results.
2. Perform the relevant diagnosis referring to the DTC Index.
  Refer to DTC INDEX . (without navigation)
  
  Refer to DTC INDEX . (with navigation)
  
  GO TO 5.
TROUBLE DIAGNOSIS FOR SYMPTOMS
Perform the relevant diagnosis referring to the diagnosis chart by symptom.

Refer to SYMPTOM TABLE . (without navigation)

Refer to SYMPTOM TABLE . (with navigation)

GO TO 5.
ERROR PART REPAIR
1. Repair or replace the identified malfunctioning parts.
2. Perform a self-diagnosis for "MULTI AV" with CONSULT-III.
  NOTE: Erase the stored self-diagnosis results after repairing or replacing the relevant components if any DTC has been indicated in the self-diagnosis results.
3. Check that the symptom does not occur.
Does the symptom occur?

Yes: GO TO 1.

No: INSPECTION END