Work Procedure
WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.
- SAVING VEHICLE SPECIFICATION
CONSULT Configuration
Perform "Before Replace ECU" to save or print current vehicle specification. Refer to "DESCRIPTION ".
NOTE: If "Before Replace ECU" can not be used, use the "Manual Configuration".: GO TO 2.
- REPLACE AV CONTROL UNIT
Replace AV control unit. Refer to "REMOVAL AND INSTALLATION ".
: GO TO 3.
- WRITING VEHICLE SPECIFICATION
CONSULT Configuration
Perform "After Replace ECU" or "Manual Configuration" to write vehicle specification. Refer to "WORK PROCEDURE ".
: GO TO 4.
- OPERATION CHECK
Check that the operation of the AV control unit and camera images (fixed guide lines and predictive course lines) are normal.
: WORK END