LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> M56 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 295 (Engine Control System - Component Testing) >> Removal And Installation >> ECM >> Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation: Removal

WARNING: This page is about a different car, the 2011 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument lower cover. Refer to "EXPLODED VIEW ".
  2. Remove the dash side finisher (LH). Refer to "DASH SIDE FINISHER : REMOVAL AND INSTALLATION ".
  3. Remove the ECM cover bolts (A) and remove ECM cover (1).
    Fig 1: Identifying ECM Cover And Bolts
    G07020201Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Disconnect ECM harness connectors.
  5. Remove ECM bracket bolt (A)
  6. Slide the ECM bracket (1) upward and then remove ECM bracket with ECM.
  7. Remove ECM bracket bolts (B) and separate ECM (2) and ECM bracket.
    Fig 2: Identifying ECM Bracket And Bolts
    G07020202Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals