Symptom Table
| Symptoms | Check items | Probable malfunction location |
|---|---|---|
| Screen is not switched to camera image, when camera switch is pressed and when shift position is shifted to the reverse position. | "AVM" is not displayed on the system selection screen of CONSULT. | Around view monitor control unit power supply circuit Refer to DIAGNOSIS PROCEDURE . |
| "AVM" is displayed on the system selection screen of CONSULT. | Check "Self Diagnostic Result" of "MULTI AV". Refer to CONSULT FUNCTION . |
|
| Screen is switched when pressing camera switch or shifting selector lever to the reverse position, however, all views are not displayed. | - | Camera image signal circuit. Refer to DIAGNOSIS PROCEDURE . |
| The screen is not switched to the rear view image even if the selector is shifted to the reverse position. | The front view is displayed normally. | Reverse signal circuit. Refer to COMPONENT FUNCTION CHECK . |
|
- | Check "Self Diagnostic Result" of "AVM". Refer to CONSULT FUNCTION . |
|
- | |
|
- | |
|
- |