Engine Coolant Temperature Sensor: Removal
- REMOVE COOL AIR INTAKE DUCT SEAL (See REMOVAL
)
- REMOVE ENGINE ROOM SIDE COVER LH (See REMOVAL
)
- REMOVE ENGINE ROOM SIDE COVER RH (See REMOVAL
)
- REMOVE V-BANK COVER SUB-ASSEMBLY (See REMOVAL
)
- REMOVE FRONT FENDER PROTECTOR UPPER LH (See REMOVAL
)
- REMOVE FRONT FENDER PROTECTOR UPPER RH (See REMOVAL
)
- REMOVE ROOF DRIP SIDE FINISH MOLDING LH (See REMOVAL
)
- REMOVE ROOF DRIP SIDE FINISH MOLDING RH (See REMOVAL
)
- REMOVE FRONT WIPER ARM HEAD CAP (See REMOVAL
)
- REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY LH (See REMOVAL
)
- REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY RH (See REMOVAL
)
- REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY (See REMOVAL
)
- DRAIN ENGINE COOLANT (See COOLANT
)
- DISCONNECT NO. 2 VENTILATION HOSE (See REMOVAL
)
- REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE (See REMOVAL
)
- REMOVE THROTTLE BODY (See REMOVAL
)
- REMOVE COLD START INJECTOR (See REMOVAL
)
- REMOVE INTAKE AIR SURGE TANK ASSEMBLY (See REMOVAL
)
- REMOVE INTAKE MANIFOLD (See REMOVAL
)
- REMOVE ENGINE COOLANT TEMPERATURE SENSOR
- Disconnect the engine coolant temperature sensor connector.
- Remove the engine coolant temperature sensor.
- Remove the gasket from the engine coolant temperature sensor.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002