Inspection Procedure
WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
HINT:
When using the intelligent tester, start from 1. When not using the intelligent tester, start from 2.
- PERFORM ACTIVE TEST BY INTELLIGENT TESTER (HEADLIGHT RELAY)
- Connect the intelligent tester (with CAN VIM) to the DLC3.
- Check that the headlight relay operates using the ACTIVE TEST (see DATA LIST/ACTIVE TEST ).
- OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
- NG: GO TO NEXT STEP
- CHECK HEADLIGHT RELAY CIRCUIT
- NG: REPLACE ENGINE ROOM JUNCTION BLOCK ASSEMBLY
- OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE