How To Proceed With Troubleshooting
WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
HINT:
- Use these procedures to troubleshoot the lighting system.
- *: Use a Techstream.
- VEHICLE BROUGHT TO WORKSHOP
- INSPECT BATTERY VOLTAGE
Standard voltage: 11 to 14 V
If the voltage is below 11V, recharge or replace the battery before proceeding.
- REFER TO PROBLEM SYMPTOMS TABLE PROBLEM SYMPTOMS TABLE
Result Proceed to Fault is not listed in problem symptoms table A Fault is listed in problem symptoms table B B: Go to step 5
A: GO TO NEXT STEP
- OVERALL ANALYSIS AND TROUBLESHOOTING*
- ADJUST, REPAIR OR REPLACE
- CONFIRMATION TEST