Inspection Procedure
WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
HINT:
After the inspection is completed, clear the DTCs.
NOTE:
- This code may be output even when a malfunction does not exist.
- When this code is output frequently, replace the radio receiver.
- CLEAR DTC
- Clear the DTC (see DTC CHECK / CLEAR
).
HINT:
These DTCs do not indicate a malfunction.
- Clear the DTC (see DTC CHECK / CLEAR
).
- RECHECK DTC
- Recheck the DTC and check if the same trouble code occurs again.
OK: Malfunction disappears.
NG: REPLACE RADIO RECEIVER ASSEMBLY
OK: END
- Recheck the DTC and check if the same trouble code occurs again.