Power Outside Mirror Inspection

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

Remove the door speaker. (See DOOR SPEAKER REMOVAL/INSTALLATION .)
Disconnect the power outside mirror connector. (See POWER OUTSIDE MIRROR REMOVAL/INSTALLATION .)

Apply battery positive voltage to the power outside mirror terminals and inspect the operation of the power outside mirror.

If not as specified, replace the power outside mirror.

MIRROR OPERATION REFERENCE

Terminal		Mirror operation
B+	GND	Mirror operation
B	D	Up
D	B	Down
D	F	Left
F	D	Right

Fig 1: Identifying Power Outside Mirror Connector Terminals

Courtesy of MAZDA MOTORS CORP.