LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2021 >> 6 Signature >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> I-ACTIVSENSE (Service Information) >> 360°View Monitor System Aiming >> Error code 11/12/13/15/16/17/18/19/1A/FF
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Error code 11/12/13/15/16/17/18/19/1A/FF

ERROR CODE STEP AND INSPECTION DESCRIPTION

Step Inspection Action
1 PERFORM 360° VIEW MONITOR SYSTEM AIMING
  • Perform the 360° view monitor system aiming.
  • Was the 360° view monitor system aiming procedure completed correctly?
 Yes The 360° view monitor system aiming is completed. Perform the 360° view monitor system screen display verification procedure.
(See 360° View Monitor System Screen Display Verification Procedure .)
No If error code 11/12/13/15/16/17/18/19/1A/FF is displayed
  • Go to the next step.

If code other than error code 11/12/13/15/16/17/18/19/1A/FF is displayed
  • Go to the procedure for the displayed error code.
2 VERIFY DTCs
 Yes Go to the applicable DTC inspection.
(See DTC TABLE [360°VIEW MONITOR CONTROL MODULE] .)
No If the 360° view monitor system aiming is not completed correctly after performing the 360° view monitor system aiming again, replace the 360° view monitor control module.
(See 360°VIEW MONITOR CONTROL MODULE REMOVAL/INSTALLATION .)
scientia non olet · About LEMON Manuals