Traction Control System (TCL)
- General Description
- Traction Control System (TCL) Diagnosis
- Introduction To Traction Control System (TCL) Diagnosis
- Troubleshooting Strategy
- Diagnosis Function
- Diagnostic Trouble Code Charts
- Diagnostic Trouble Code Procedures
- DTC C1396: Engine Torque Intervention Refusal
- DTC C1397: Transmission Range Switch Failure
- DTC U1100: CAN Communications System Time Out Error Engine Related Data
- DTC U1101: CAN Communications System Time Out Error A/T Related Data
- DTC U1120: CAN Communications System TCL Uncontrollable by Engine Malfunction
- DTC U1400: Dynamic Range Error APS1
- Symptom Chart
- Symptom Procedures
- INSPECTION PROCEDURE 1: When The Ignition Switch Is Turned To The "ON" Position (Engine Stopped), The "TCL OFF" Indicator Light Does Not Illuminate. INSPECTION PROCEDURE 2: When The Ignition Switch Is Turned To The "ON" Position (Engine Stopped), The TCL Work Indicator Light Does Not Illuminate. INSPECTION PROCEDURE 3: The "TCL OFF" Indicator Light Remains Illuminated After The Engine Is Started. INSPECTION PROCEDURE 4: The TCL Work Indicator Light Remains Illuminated After The Engine Is Started.
- INSPECTION PROCEDURE 5: When The TCL Switch Is Push On, TCL Does Not Cancelled.
- INSPECTION PROCEDURE 6: TCL Does Not Operate.
- Data List Reference Table
- Actuator Test Reference Table
- Check At Abs/TCL-Ecu Terminal Voltage & Terminal Voltage Check Chart
- Resistance And Continuity Between Harness-Side Connector Terminals
- Special Tools
- On-Vehicle Service
- TCL Switch
- Wheel Speed Sensor
- Abs/TCL-Ecu