DTC C2205: Steering Wheel Sensor System (Internal Error): Diagnosis
- STEP 1. Scan tool (M.U.T.-III) CAN bus diagnostics.
Use scan tool (M.U.T.-III) to perform the CAN bus diagnosis.
Q: Is the check result normal?
YES: Go to Step 2.
NO: Repair the CAN bus lines (Refer to CAN BUS DIAGNOSTICS TABLE ).
- STEP 2. Scan tool (M.U.T.-III) data list.
Check the following data list (Refer to DATA LIST REFERENCE TABLE ).
Item No. 8: Steering angle sensor
Q: Is the check result normal?
YES: Go to Step 3.
NO: Replace the steering wheel sensor (Refer to STEERING WHEEL SENSOR ).
- STEP 3. Check whether the DTC is set again.
Q: Is the DTC C2205 set?
YES: Replace the AWC-ECU (Refer to AWC-ECU <VEHICLES WITH S-AWC> ).
NO: Intermittent malfunction (Refer to HOW TO COPE WITH INTERMITTENT MALFUNCTION ).