Work Procedure
WARNING: This page is about a different car, the 2023 Mitsubishi Outlander PHEV. However, it is still accessible from the selected car via links, so may be relevant.
Always perform the additional service after replacing the ADAS control unit 2.
- ADAS CONTROL UNIT 2 CONFIGURATION
Perform the ADAS control unit 2 configuration. Refer to WORK PROCEDURE .
>>
GO TO 2.
- WRITING MAC KEY
Perform MAC key writing. Refer to WORK PROCEDURE .
With MI PILOT Assist >>
GO TO 3.
Without MI PILOT Assist >>
INSPECTION END
- STEERING TORQUE CALIBRATION
Perform the steering torque calibration. Refer to WORK PROCEDURE .
>>
INSPECTION END